Linksys EA2700 setup

Linksys EA2700 setup is very easy with or without installation CD or software. It can be easily installed like other Linksys router setup process. Linksys EA2700 is App Enabled N600 Dual-Band Wireless Router with 4 Gigiabit Ethernet ports. EA2700 can run an ever expanding selection of apps for accessing your home network and the devices connected to it.

We will discuss step by step on Linkys EA2700 setup with or without CD or installation software.

Linksys EA2700 setup without Cisco connect software:

You can install EA2700 without the Cisco connect software also. You just need to open the Linksys router setup page and change the settings manually. Setup page is the page where you can change the settings of EA2700 manually. Guest network access can be managed using setup page . There is no need to install the Cisco software to create guest access which was necessary for E1000, E2000, E3000 routers.

Step 1: Check Internet connection through modem.

Connect the computer directly to the Internet modem and make sure that your Internet is working correctly through the modem. If it is not, then call the internet service provider and get the Internet connection fixed through the modem.

Step 2: Make connections to the Linksys EA2700 router.

Connect the modem to the Internet / WAN port and connect your computer to one of the 4 Ethernet ports on the EA2700 router. If you connect the computer to the internet port, it will not communicate with the router. And you will not be able to setup your router. So make proper connections as shown in the image below.

Linksys EA2700 setup

Step 3: Open the Linksys E900 router setup page

Open the Internet browser on your computer. In the address bar type 192.168.1.1. This number 192.168.1.1 is the default IP address of the router. It will ask you for the user name and password.

Try the Linksys default password “admin”. If that does not work, then try any other password that you might have used while installing your router for the first time. If nothing is working, then you will need to reset Linksys router to factory default settings.

Once you open the setup page of the router, you will see all the settings which are required to be customized.

Step 4: Change Internet connection settings.

Change the Internet connection settings according to your Internet service provider.

In case of Cable Internet provider, you need to clone the MAC address of the main computer. 
In case of DSL Internet service, you need to change the PPPoE settings.

For detailed information check this page Linksys router setup .

Step 5: Access Internet on Main computer

You have now changed the internet connection settings. Try to go online on the main wired computer. Once your main computer is able to go online, your router is connected to the modem successfully.

Step 6: Change wireless settings

Change the wireless settings. Click on Wireless tab. Create a new wireless network name SSID. Keep the Network mode Mixed. SSID Broadcast Enabled. Click Save settings.

Go to Wireless Security sub tab. Enable security on the wireless network. Change it to WPA2 personal. Enter the password. Save settings. Do not share your network key with anybody.

Step 7: Connect to wireless network.

Your wireless network is setup. If you have any wireless computer or other Wifi devices then try to connect to WiFi. You will see the Wifi name that you just created. It will ask you for the password. Enter the Wifi password. And it will connect.

Setup Linksys EA2700 using Cisco connect:

Use the Cisco connect software for the initial setup of your new EA2700. Run the program and at the end it will connect you to the Internet. You don’t need to do anything. The software will do all the settings on its own. It will also create the new wireless network with the unique name and password. You will get all the wireless settings at the end of the installation. You can later change the SSID and the security key.

It will also create the new wireless network with the unique name and password. Your WiFi name will be funny name like the name of fruit or animal with color for example white monkey or anything else.

You will get all the wireless settings at the end of the installation. You can later change the SSID and the security key.

What is Linksys EA2700 default password?

Linksys EA2700 default password is admin. However if you have installed your router using Cisco connect software then your wireless network key will be the password of router also. Open the Cisco connect software and go to router settings, you will see the user name and password.

If nothing is working then you will need to reset EA2700 and reconfigure. Remember if you reset the device, it will come back to factory default settings and you will lose all the settings.

Linksys EA2700 Features:

1) High speed – High speed for fast wireless transfer rates. EA3500 has transfer rates of up to 300 + 300 Mbps to connect your devices at fast speed.

2) Extended range with MIMO antenna array – It has 4 internal antennas. 2 x 2 for 2.4 GHz, 2 x 2 for 5 GHz.

3) Gigabit Ethernet Ports for 10x faster wired speeds than standard Ethernet. Four (4) Gigabit Ethernet ports on the back that can provide faster data transfer on your wired network.

4) Simultaneous dual-band to maximize throughput. For more wireless bandwidth, EA2700 can create two (2) simultaneous yet separate wireless-N networks, one using the 5 GHzradio frequency band and one using the 2.4 GHz band.  For example, you may use the wireless-N 2.4 GHz network to surf, email, and print while keeping the less crowded, wireless-N 5 GHz network free for time-sensitive traffic like online gaming, and HD videos.

linksys ea2700 setup

5) Cisco Connect Cloud (Available summer 2012)- Get anywhere, anytime access to your home network from a browser or mobile device. Plus, optimize your online experiences with included apps.

6) Guest Access – Guest Access provides visitors to your home with Internet access without giving them access to your computers or personal data. It allows you to provide Internet access up to 50 guests visiting your home without granting them access to your local network. The Guest Access feature makes sharing Internet access to other wireless devices possible while maintaining maximum security to your home network.

7) IPv6 enabled – IPv6 is a new IP protocol that uses simplified packet headers and requires IPSec as a fundamental interoperability requirement. It also has improved support for mobile IP and computing devices.

Linksys EA2700 Firmware Upgrade

First of all, use a wired computer for firmware upgrade. Avoid wireless connection for this process.

If you have a wireless computer only then disable wireless network on the computer and connect it with the Ethernet cable to EA2700.

Download Firmware from Linksys website. Save it on your computer.

Open Linksys router setup page using 192.168.1.1.

Go to Administration tab. Click on Firmware upgrade Sub-tab.

Browse/select the Firmware file that you have downloaded on your computer.

Click Start Upgrade. Wait for the process to Finish. After firmware upgrade is finished, it will reboot the device automatically.

Buy New Linksys Router

9 thoughts on “Linksys EA2700 router setup and reviews”

  1. This is one of the best articles on Linksys ea2700 setup. Just open the settings page of the router using 192.168.1.1 and change the settings manually. This was so easy

  2. masterBlaster10

    Thanks for the detailed information about Linksys EA2700 setup. I had hard time doing it using Cisco connect software. But managed to configure it manually.

  3. Linksys EA2700 loses internet connection
    I have an EA2700 router on a Comcast cable connection. I use Linksys SmartWiFi without cloud connect. My problem is that I INTERMITTENTLY lose internet connectivity. It isn’t due to Comcast or my modem, since when I bypass the router and connect my desktop directly to the modem, it works fine. Also, when this happens I am still able to print wirelessly over my home network. It’s just the internet that won’t work. I tried hard and soft resets of the modem (including 30-30-30 reset), router, and rebooted the computer.

  4. linksys ea2700 router not working.
    No Internet Access with EA2700. Purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), access the settings, etc but cant reach the net. I’ve tried turning off the firewall, flushing the DNS, disabled the IPv6. Did all the basic steps, resett the modem/router, etc…nothing.

  5. Can not connect to the wireless network on new laptop. Other old laptop is connected and I can access Internet on old one. But the new one has problem connecting to WiFi. I t is running on Windows 7. When I enter the network key, it stays there and says not connected.
    Also want to know the guest network password for Linksys EA2700? I did not install Cisco connect software so I am not sure where to find these settings. Can I register for cisco connect cloud?

  6. can not connect to the guest network.
    Actually it is connected to the guest network but it is not asking for the guest access password. The main network is working and I can access the Internet. But where do I enter the guest password?

  7. One of my friend is trying to connect his iPad to the cisco guest network. He can connect to the guest network but can not access Internet. It is not asking for the guest password. I have not installed Cisco connect software but I can open the setup page and I can see the guest password. Is there a way on iPad to enter the password manually.

  8. Trying to setup new Linksys EA2700. I have a desktop connected to the router with the cable. The desktop is old with windows xp installed on it. When I try to run the cisco connect software, it does not find my router. I want this desktop to be the main computer and don’t want to install this software on my office laptop. Can I setup this router manually like other Linksys routers?

  9. I just bought new EA2700. The setup was very easy like other E series routers. Only thing is that I can connect to the guest but can not access Internet. I get the IP address but can not ping any website. All the other computers are working.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top