Comments on: How to reset Linksys router

By: Sheldon

Sheldon — Fri, 18 Feb 2022 08:25:01 +0000

The power light is blinking on my router. I tried to reset Linksys router and it is still blinking. I tried it for long time but still the same thing. I guess the router is broken now and I may need a new one.

By: weesiong45

weesiong45 — Fri, 05 Jan 2018 10:37:20 +0000

Reset not working.
My WRT45G Ver2 cant access to 192.168.1.1 since few days ago. And i try to reset it as usual but the reset button does not work even if I hold it down for more than 1 minute.

By: GeorgerRT

GeorgerRT — Fri, 06 Jul 2012 11:16:21 +0000

Can not connect to the wireless network on new laptop. Other old laptop is connected and I can access Internet on old one. But the new one has problem connecting to WiFi. I t is running on Windows 7. When I enter the network key, it stays there and says not connected.
Also want to know the guest network password? I did not install Cisco connect software so I am not sure where to find these settings. When I try to open 192.168.1.1 and it also requires a password. I tried default password admin, but that did not work. How do I find security key? Do I need to reset if I don’t know the log in details?

By: NathanM

NathanM — Fri, 15 Jun 2012 18:16:01 +0000

If I press the reset on the router, will that reset the wireless password also.
I am looking for wireless network password. Don’t know anything about networking.
Need help

By: HarryBarry

HarryBarry — Wed, 18 Apr 2012 18:42:26 +0000

Trying to reconfigure my WRT120N with the new cable Internet service. Can not access the setup page. Tried everything but no luck. Each time I try to open the setup page, I get error 401 .

By: BarbaraGR

BarbaraGR — Mon, 09 Apr 2012 10:58:56 +0000

My son pressed the reset accidentally and since then I am not able to go online on my laptop. The video on YouTube is really good. Also the steps to setup process in your guide is really easy. I was able to reconfigure my entire network.

By: MathewCJ

MathewCJ — Fri, 06 Apr 2012 11:22:56 +0000

Your video on youtube is very good. I was finally able to reset my router and open the configuration page. I wanted to secure my network and that is why I had to open the setup page. Thanks for the help.

By: ChewLR

ChewLR — Mon, 06 Feb 2012 06:42:04 +0000

I did 30-30-30 reset and got my working again. I have WRt54G model. My Linksys router power light blinking continuously. I pressed the button for 30 seconds. and got the power light solid finally. Thanks for your help.

By: Achalk

Achalk — Sat, 04 Feb 2012 11:45:03 +0000

How to reset password?
I have got older WRT120N, just bought from online used device. I am trying to set it up without installation CD. I got to the point where I need to enter the default password admin. I tried that many times but it is not working. I also followed the 30-30 reset process but the password is not accepted. Is my device locked? Do I need to return it. They have 15 days return policy. If I am not able to open the setup page then there is no use of this box. Right?

By: ChuckDjenn

ChuckDjenn — Tue, 31 Jan 2012 17:45:23 +0000

How to reset E3000 if I am not able to unscrew it? My device is not on the desk, it is mounted at the ceiling. I have a computer connected with the Ethernet cable but I can not access the setup page.

By: LindseyDP

LindseyDP — Wed, 11 Jan 2012 12:00:06 +0000

Can not find reset button on WRT54GC. It is not at the bottom or the flip side. How to reset Linksys WRT54GC using webpage? I am able to open the settings page. Where do I go on the settings page? I am not sure what I am doing.

By: GeralsHYr

GeralsHYr — Mon, 09 Jan 2012 16:09:52 +0000

How do I unbrick my old Linksys WRT54G ? It is version 5 and I tried to upgrade the firmware on it. I followed the firmware upgrade instruction and power cycled . Now the power light is blinking rapidly and I can not access Internet through Linksys WRT54G.

By: JohnyDR4

JohnyDR4 — Wed, 04 Jan 2012 12:42:36 +0000

I am not able to change the settings of my Linksys E3200 using Cisco connect. I tried to install it manually but can not access Internet when installed manually. I am not sure what settings do I need to change so that I can install it manually.

By: SarahJD

SarahJD — Wed, 28 Dec 2011 15:56:23 +0000

Trying to reset Linksys E3200 because I am not able to connect to the wireless network. I am not sure about WPA key and don’t know how to find it.

By: RhindaST4

RhindaST4 — Wed, 14 Dec 2011 16:45:27 +0000

thanks for your help. I was not able to secure my WRT160N because of my old computer. Your technician helped me to configure a new wireless network with the new security settings. I believe my network is secured now and no one will access it without my permission.

By: Froggy425

Froggy425 — Wed, 07 Dec 2011 17:03:44 +0000

Can not access the setup page of E3000. I have been using this model for more than a year and I never had any problem. Now I want to change the password of my network but I can not log in. What is the default password ?

By: PamelaDR3

PamelaDR3 — Mon, 05 Dec 2011 10:51:23 +0000

How to access setup page of WRT54G ? I tried 192.168.1.1 but it is not opening anything. I have DSL Internet connection. I don’t want to lose my settings. What could be the IP address of my device?

By: CarlHG4

CarlHG4 — Sat, 03 Dec 2011 17:14:56 +0000

I did try to press the small red colored button but the power light is not blinking. I can not access the 192.168.1.1 page because the password is not accepted. I have WRT120N

By: julieJG2

julieJG2 — Thu, 01 Dec 2011 10:23:45 +0000

My old WRT54G is not sending signals. I don’t see WLAN light and the power light is blinking. It is version 5 model. I am also trying to setup WRT120N but I can not access the setup. I do not have CD.

By: AndyKB65

AndyKB65 — Tue, 29 Nov 2011 10:44:18 +0000

I was trying to access the setup page using 192.168.1.1 but it says 401 unauthorized all the time. What is the default password of E3200 ?