Comments on: Linksys E1000 Cisco connect software

By: fulbeatrice

fulbeatrice — Thu, 04 Jan 2018 10:54:37 +0000

Linksys E1000 Cisco connect software is not working.
I tried installing it manually and it did work But I want cisco connect software installed on the main computer so that I do not need to open the setup and change the settings manually.

By: Archies126

Archies126 — Wed, 26 Nov 2014 07:55:06 +0000

I am having hard time setting up my E1000.
I can connect the computer directly to the modem and it works well. I have verizon DSL. When I connect the modem to the router and computer to the Ethernet port, it does not work. I tried changing the LAN IP address of E1000 and also tried PPPoE setting but nothing works. I did it manually as well as using Cisco connect software.

By: IamtheBEST

IamtheBEST — Mon, 27 Aug 2012 11:46:00 +0000

Cisco connect guest network is not working. I had been trying to get my friend’s laptop on the guest network but he can not access Internet when connected to Guest but it works on main wireless. It seems that guest is working. I have installed the software and all the other computers and other devices are working.

By: GeremyBonty

GeremyBonty — Wed, 27 Jun 2012 09:52:39 +0000

I just bough E1000 from one of my friends. he was using it for more than a year. I installed it without any problem (using Cisco software). Got my one wired and 1 wireless laptop online. Only problem is with the Guest access. I tried to get on the Internet with this Guest network but no luck. My laptop is not getting IP address when connected to the guest. My friend also tried but he was also not getting Internet. What IP address can I assign manually? Will that work? Firmware is already upgraded.

By: TBorthwick

TBorthwick — Mon, 14 May 2012 18:12:23 +0000

I can not access Internet through the router. When I connect the computer to the modem, it works. But if I connect it through the router, it does not work. I tried to run Cisco connect software but that also fails and says router not found. If I reset the router, I will lose all the network settings which were installed before. How can I get it working.

By: JeremyGD

JeremyGD — Tue, 24 Apr 2012 10:34:47 +0000

The guest network password is not working. I am trying to connect to the guest network. I can join the guest access and it asks me for the guest password also but when I type the number, I can not get on the Internet. I know the security code is correct.

By: KevinTP5

KevinTP5 — Wed, 18 Apr 2012 19:14:24 +0000

Looking for guest network password. I am trying to connect my friends laptop to access the Internet. He can see my unsecured guest connection and he can join also. But when he tries to open the Internet browser, it requires guest password. I entered the correct guest password which I think is, but still it is not working.

By: NeilJayB

NeilJayB — Mon, 26 Mar 2012 18:54:39 +0000

I am really very happy to get my e1000 router up and running. I had lot of issues with the setup. Also the manual was not useful at all. I was not even able to open the settings page using the manual. Thanks for your guide. I upgraded the firmware and also reconfigured it manually. It was a very good experience for me.

By: MelissaRDen

MelissaRDen — Thu, 01 Mar 2012 17:41:05 +0000

Thanks for the help. Your guide is very helpful for Linksys E1000 manual setup. I was able to reinstall it without cisco connect software. Actually I pressed the reset button on the router to find Linksys E1000 default password. I tried to run installation CD but that did not help me cisco connect guest password setup. Finally I just changed the settings manually.

By: PradyuAP

PradyuAP — Mon, 23 Jan 2012 17:47:19 +0000

What is Linksys E1000 default password?
I installed the router using the software and I can not find the option to open the software program on my main computer. How can I check the password?
Or do I need to reset it and re-install ?

By: ImrANSK54

ImrANSK54 — Thu, 24 Nov 2011 11:15:00 +0000

Where can I find the Linksys E1000 manual setup. I am trying to reconfigure it with the new Internet connection and I do not have CD.

By: SharinTG5

SharinTG5 — Fri, 18 Nov 2011 14:45:24 +0000

The Linksys E1000 default password is admin. But if you have used CD to setup then default password must be different. You can open the software and check the password settings. Same information is given in Linksys E1000 manual.

By: HillaryK87

HillaryK87 — Sun, 30 Oct 2011 12:47:30 +0000

What is the Linksys e1000 default password? I m trying to connect to the Internet on my laptop but not sure about the default password. I need help.

By: JImmyThom3

JImmyThom3 — Wed, 12 Oct 2011 17:41:21 +0000

I tried Linksys E1000 setup with the help of Cisco software. Everything is working properly but I can not get my friend’s laptop to the Guest wi-fi. It says connected to the Guest SSID but can not access Internet.

By: SharmiChang32

SharmiChang32 — Thu, 22 Sep 2011 18:50:21 +0000

Where do I find e1000 manual ? I tried to run the CD but it is not working and I can not setup E1000 guest password. Looking for the manual so that I can change the settings manually.

By: AmtheDon3

AmtheDon3 — Sun, 18 Sep 2011 12:13:13 +0000

I was trying Linksys E1000 setup using software CD. The software did not help me setup my wireless router. That is why I opened the E1000 setup page and changed the settings manually. Now I can access Internet on all my laptops but without guest network access. There is no option to change the settings for Guest password using web interface of E1000. Is there a proper Linksys E1000 manual ?

By: AmardeepSingh543e

AmardeepSingh543e — Fri, 16 Sep 2011 20:49:11 +0000

Where can I find guest password and the Linksys E1000 default password ? I don’t know the password to access the settings of my E1000. What if I reset E1000? Will I lose all the settings. I have 1 desktop and 2 wireless laptops and a play station. If I reset then I need to reconfigure it. I do not have my CD with me. What should I do? Help please…

By: SonyaTony

SonyaTony — Mon, 12 Sep 2011 18:57:37 +0000

I need the guest network password but i don’t it can u help me out. the connection is great at my location but i don’t know how to obtain the guest access password .

By: Nate

Nate — Sat, 27 Aug 2011 03:51:27 +0000

Ok i have the Linksys E1000 router and when i set it up it asked me for a guest password? I’m clueless. And it would also help if u could tell me how to get my play station 3 online using the router. THX

By: Imran251

Imran251 — Fri, 26 Aug 2011 08:30:01 +0000

What is Linksys E1000 default password? I tried all the passwords that I thought it could be, but none of them worked. I think I should reset my Linksys E1000 and reinstall it.