Linksys MR8300 setup – FAQ – Reset – Manual – Firmware upgrade – Troubleshooting

Linksys MR8300 setup is very easy and it is just like Linksys Velop setup using Linksys Mobile App. In short, in order to install Linksys MR8300 router manual, you will need to install Linksys App on your mobile. We will also discuss about how to reset, firmware upgrade, manual and troubleshooting.

The Linksys MR8300 is a high-performance wireless router with dual-band Wi-Fi rates of up to 2.2 Gbps, 4 Ethernet connections, and advanced features including MU-MIMO technology and beamforming.

It is intended to provide dependable and quick Wi-Fi connectivity for medium-sized homes or offices. The MR8300 also has a mesh networking function, which lets you to extend Wi-Fi coverage by connecting Linksys Velop nodes to the network.

The router can be configured and managed via the Linksys App or a web browser, and it contains powerful security capabilities to keep your network safe from internet attacks. With the Linksys MR8300 router, you can stream, game, and browse on numerous devices at the same time.

Watch Linksys MR8300 setup video

Linksys MR8300 setup using App

Initial Requirements:

1. You need an active Internet connection.
2. You also need mobile device so that you can install Linksys App for initial setup.
3. Download the App. Linksys app is available for Android and iOs (Apple) devices.
4. If you are already using Linksys Velop network and if you want to add this MR8300 router in the network then you will need to install this router as primary node.

Initial connections:

Connect the modem to the Internet/WAN port on Linksys MR8300 router. So there will be Ethernet cable coming out of your Internet modem to the Internet/WAN port on Linksys router.

Plugin the power to the modem and the router both. Wait for the Light on the router to become solid purple.

Run Linksys App program:

1. Launch the Linksys App on your mobile device.
2. Tap on Launch setup option.
3. Setup program will ask you turn ON the Bluetooth on your mobile.
   It may also turn it on automatically. So if it is asking you turn on Bluetooth connection, then turn it on. Setup program will use Mobile’s Bluetooth connection to talk to Linksys MR8300 router.
4. Now the program will search for the Linksys router nearby.
   It will find your Linksys MR8300 router automatically. (in case if it doesnot find the router, it will ask your for type of device. Select Wifi mesh Router to search again.) Click Next.
5. Now the setup program will look for the type of Internet connection coming from the Internet modem.
   It will detect it automatically.
6. If you are using PPPoE or DSL Internet connection, then it may prompt you for the PPPoE user name and password. Enter the PPPoE user name and password given by your ISP.
7. Once the Internet is setup on the router, it will ask you to create Linksys Cloud account for your Linksys MR8300 setup.
   If you already have account with Linksys Cloud then Login to account. if you are then create a new account.
8. Personalize Wireless network name and password.
   This will be name for your Wi-Fi network and password. Tap Next.
9. Setup will now configure your Wi-Fi network.
10. Once the Wireless network is ready, your Linksys MR8300 setup is done.
    It will now ask you to name the router and it will give you list of names to choose from. Select or customize the name for the router.
11. At the end, you will see the success message. That means you are done.
12. Try to connect to the Wireless network on your mobile or laptop or any other Wi-Fi device.
    You will see your new wireless network name. It will ask you for the Wi-Fi password. Enter the password and get connected.
13. You will be able to access Internet on all the devices connected to Linksys MR8300 router, wired or wireless.
14. That’s it. You are Done.

Buy New Linksys MR8300 Router

How to upgrade Linksys MR8300 firmware?

Linksys MR8300 firmware gets updated automatically. While installing this router for the very first time, you must have seen the option to allow upgrade automatically. And you might have done that too.

Let us check if the router firmware upgrade is automatic or not!

1. Open Linksys App.
2. You will see router dashboard.
3. Tap on main Menu icon which will be at the top Left or Right corner.
4. Go to Device Administration option.
5. There you will see the option “Automatic Firmware Update”. Make sure that this option is enabled.
6. If there is any firmware update is available then it will get updated automatically.

How to Reset Linksys MR8300 router?

There is small reset button on the rear side of Linksys MR8300 router. It is a red button. Press and hold this reset button for at least 15 seconds. You will see that light will go out and then turns bright red.

Release the reset button. Unplug the power to the router. Plug it back in.

Wait till router gets ready with solid purple light.

Before resetting the router, you must know that you will lose all the settings of your network and it will come back to default settings. And you will need to reconfigure it.

Linksys MR8300 default password

Is there any default password for this router?

No, there is no default password for MR8300 . The user name and password is created by the user while installing MR8300 first time using Linksys App.

So you have to have this router installed using Linksys App initially. Open the Linksys App. Go to Main Menu at the top corner. Then go to Device Administration section. There you will see the option to change the router password.

How to install OpenWRT on Linksys MR8300 router

OpenWRT is a free and open-source firmware that allows users to customize and alter their routers to meet their individual requirements. It is a Linux-based firmware that gives users more control over the settings, security, and performance of their router. Installing OpenWRT on your Linksys MR8300 router might help you realize its full potential by enabling additional features like VPN support, dynamic DNS, and bandwidth monitoring.

To install OpenWRT on your Linksys MR8300 router, simply follow these steps. To begin, download the OpenWRT firmware for the MR8300 from the OpenWRT website. Then, go into your router’s web interface and navigate to the firmware upgrade page. You can now select the OpenWRT firmware file you downloaded and begin the upgrade procedure.

1. You can also go directly to this url https://192.168.1.1/fwupdate.html
2. Flash the factory.bin OpenWrt image.

After the upgrade, your Linksys MR8300 router will be running OpenWRT firmware, allowing you to access a variety of additional functionality and customization choices. OpenWRT includes a user-friendly web interface for configuring your router’s settings, configuring VPN connections, and monitoring your network’s bandwidth usage. You may also use OpenWRT to install other software packages and plugins to further expand the functionality of your router.

While installing OpenWRT on your Linksys MR8300 router may appear difficult at first, it can be a terrific way to get more out of your network and tailor it to your personal needs. You can take control of your router’s settings, security, and performance with OpenWRT, and enjoy fast and reliable Wi-Fi coverage for all your devices.

Frequently Asked Questions (FAQ)

Can I access Linksys MR8300 router web interface using computer?

Yes, you can. Connect the computer to the device with the Ethernet cable or Wireless connection. Open Internet browser on your computer. In the address bar type 192.168.1.1 . It will now try to open the web interface of the device. Enter your Linksys cloud account credentials, then click Sign In.  And you can also click the link next to For local access and enter your admin password in the field.  Then click Sign In.

Can I use MR8300 with Existing Velop network?

Yes, you can use it with Existing Velop Network. But in this case, you will need to setup Linksys MR8300 router as a primary node. So you will need to replace your primary Velop node with this router. And use old primary node as secondary node.